Puresolve is a new semi-aqueous solvent alternative that eases transition away from CFC and HCFC circuit board cleaners in ultrasonic and batch applications. It has very low solvent vapour loss compared to other cleaning solvents and is effective for both organic and inorganic soils, including solder flux residues. It is particularly effective on ionic contaminants that normal solvents have difficulty with.

AQUEOUS SOLUTIONS

Metaclean is a blended, silicated alkaline cleaner for use in superior, non-foaming, alkaline immersion cleaning applications. The cleaner does not contain any environmentally unfriendly detergent compounds. It is used at between 40° and 80°C, and is suitable for all metal surfaces.

Sensoclean is a blended, phosphate based alkaline cleaning compound for use in non-foaming, immersion cleaning applications where free-rinsing properties are desired. The cleaner does not contain any environmentally unfriendly detergent compounds. It is used at between 45° and 70°C, and is suitable for all metal substrates.

Sodaclean is a high alkalinity cleaner designed for use on ferrous substrates in immersion applications at between 40° and 80°C. The cleaner does not contain any cyanide or environmentally unfriendly detergent compounds.

Sprayclean is a low alkalinity, non-caustic blend of phosphates and detergents to yield a superior, non-foaming, spray cleaner suitable for cleaning of all metal surfaces. The product does not contain any sodium compounds or environmentally unfriendly detergent compounds.

ANTI-CORROSION SOLUTIONS

Steelguard is a special blend of corrosion inhibitors, waxes and mineral oil within a petroleum-based carrier that acts as a multi-use penetrating lubricant. Steelguard will displace moisture and protect metal surfaces. It is effective for protecting electrical equipment. It is approved to UK Def Stan 68-10, PX 24 (NATO C-634).

WBRI is a purpose-designed, nitrite free, water dilutable rust and corrosion inhibitor specifically aimed at ferrous metals. It is ideal as a temporary corrosion inhibitor and as an additive to aqueous pressure testing systems.

PRODUCT DEVELOPMENT

Alliance Technology also offers a product development and matching service.

Should your process have very specific parameters and requirements we will look to develop bespoke products specifically designed for your needs.

Should you already be using a product in your process which cannot be replaced by a product from our standard range we will match that product and aim to improve on performance, health and safety and environmental requirements.